HOURS 7:30AM - 4:00PM MON - FRI
Schuham offers a complete line of Curries flush frames in 16 Ga. cold-rolled steel. Frames can be purchased knocked down or welded and ground smooth. Frames are manufactured for all wall conditions such as masonry, steel, stud, wood stud and poured concrete. Frame sizes are available to match door sizes, in any combination of singles or paired. Nonstandard width or height frames are available on special order.
4-3/4", 5-3/4", 6", 6-1/2", 6-3/4", 7-1/4", 8-1/4", 8-3/4"
Click here for a diagram of Frames stock sizes
- The hand of a door is always determined from the outside.
- The outside of an exterior door is the street or entrance side.
- The outside of an auditorium door is the corridor or hall side.
- The outside of a room door is the corridor or hall side.
- The outside of a closet door is the room, corridor or hall side.
- The outside of a single communicating door is the side of which the butts are invisible when the door is closed.
- The outside of twin communicating doors is the space between the two doors.
Width from 2'0" to 4'0" Height: 6'8" – 8'0"
Click here for a diagram of Frames stock sizes
Click here for Elevations and Configurations Diagram
Click here for Curries Hollow Metal Frame Anchors Spec Sheet (pdf)
There are no hourly ratings for a basic fire frame, unless the labeling on the frame specifically states that the frame is rated for something less than 3 hours. Frames used in masonry walls may be used with a maximum 3 hour fire door. Click here for U.L. Specifications
Knock down masonry frames can be ready same day. All welded three sided frames have an approximate 2-3 day lead time. All other frames require a quote with a minimum of 5 day lead time. Custom frames can be built to fit any dimension. Please call for a drawing and quote.
